Differences

This shows you the differences between two versions of the page.

--- projects:rctrainer [2023/03/30 20:40] – jattie
+++ projects:rctrainer [2023/04/03 12:41] (current) – [Slicer Formats] jattie
@@ Line 1: / Line 1: @@
 ====== 3D Printed RC Planes ======
-This section is the reference page for my 3D printed RC trainer plane. The idea began months ago when I stumbled upon this article on intractables on building a [[https://www.instructables.com/How-to-Make-a-RC-DHC-2-Beaver/|RC DHC-2 Beaver]].
+This section is the reference page for my 3D printed RC trainer plane. The idea began months ago when I stumbled upon this article on intructables on building a [[https://www.instructables.com/How-to-Make-a-RC-DHC-2-Beaver/|RC DHC-2 Beaver]].
 {{:undefined:img_0043.jpeg|}}
-I did a decent amount of work, but did not particularly like the accuracy of my hot glue gin process and the even weights I achieved with this approach. In the process of working with the concepts and trying to learn more about the technicalities of buidling RC planes, I found this [[https://rcplanes.online/design.htm|excellent free resource]] with a lot of detailed info on the topic.
+I did a decent amount of work, but did not particularly like the accuracy of my hot glue gin process and the even weights I achieved with this approach. In the process of working with the concepts and trying to learn more about the technicalities of building RC planes, I found this [[https://rcplanes.online/design.htm|excellent free resource]] with a lot of detailed info on the topic.
-Messing about with my 3D printer, I discovered a a new print material Leight Weight (LW) PLA and the idea got new life again.
+Messing about with my 3D printer, I discovered a a new print material **L**ight **W**eight (LW) PLA and the idea got new life again.
 I did not simply want to download and print other peoples work. The journey is as important is the final result. So I started work on converting this model to a printable project.
@@ Line 13: / Line 13: @@
 {{:projects:rcmodel.png?nolink |}}
-The wing span is just short of one metre and about 750mm nose to tip, so this needs to be copped up in parts that will fit on my 3D print bed of 230 x 230 x 250.
+The wing span is just short of one meter and about 750mm nose to tip, so this needs to be chopped up in parts that will fit on my 3D print bed of 230 x 230 x 250.
+===== Fusion 360 Plans =====
+  * {{:projects:rc_trainer_v4.f3d|Large unsliced model - V4}}
+===== Slicer Formats =====
+{{:projects:stabaliser_elevator_parts.png?nolink&400|}}
+  * {{:projects:elevator_l.stl|Left Elevator}}
+  * {{:projects:elevator_r.stl|Right Elevator}}
+  * {{:projects:stabaliser_l.stl|Left Stabaliser}}
+  * {{:projects:stabaliser_r.stl|Right Stabaliser}}
+The gcode for all of the above:
+  * {{:projects:ccr6se_elevators_and_stabalisers.gcode|elevators_and_stabalisers.gcode}}
+  * {{:projects:ccr6se_tail_assy.gcode|tail_assembly.gcode}}
+{{:projects:img_0046.jpeg?nolink&600 |}}
-{{:projects:rc_trainer_v4.f3d|Fusion 360 Plans - V4}}