Differences

This shows you the differences between two versions of the page.

--- projects:3dprint:octoprint_short [2023/05/19 08:18] – [Setting Up Octoprint On Linux - Short version] jattie
+++ projects:3dprint:octoprint_short [2023/05/22 09:03] (current) – [Setting Up Octoprint On Linux - Short version] jattie
@@ Line 8: / Line 8: @@
 This page covers the essentials of launching and setting up an Octoprint container image using LXC.
+Pass through the usb connections((https://linuxcontainers.org/lxd/docs/master/reference/devices_unix_block/))
 <cli>
 jattie@hp-linux:~$ lxc config device add octo video0 unix-char source=/dev/video4 path=/dev/video0 required=false gid=44
-jattie@hp-linux:~$ lxc config device add octo ttyusb0 unix-char path=/dev/ttyUSB0 gid=20
+jattie@hp-linux:~$ lxc config device add octo ttyusb0 unix-char path=/dev/ttyUSB0 gid=20 required=false gid=44
 </cli>
@@ Line 21: / Line 21: @@
 ===== Webcam =====
-  * mjpg-streamer((https://jamesloper.com/ubuntu-server-install-mjpg-streamer)) ((https://github.com/jacksonliam/mjpg-streamer/blob/master/mjpg-streamer-experimental/plugins/output_http/README.md))
+  * mjpg-streamer((https://jamesloper.com/ubuntu-server-install-mjpg-streamer)) ((https://github.com/jacksonliam/mjpg-streamer/blob/master/mjpg-streamer-experimental/plugins/output_http/README.md)) ((https://snapcraft.io/docs/getting-started)) ((https://github.com/john-clark/mjpg-streamer-setup))